might make your Millett Hybrid work a little bit better!
uses a single power supply, unlike opamp-based amplifiers. Clean
power is your friend. There are two popular DIY power supplies
that are aces for
this amplifier. The first is the STEPS and the second
is the TREAD.
Both are linear,
regulated power supplies that, when built properly, are stone, cold
quiet. If you use
one of these power supplies, make sure that you use a regulator rated
for at least
one amp. I recommend the LM317T, a 1.5A regulator. The
500mA regulators will
just shrivel up and die.
you've got a tip, tweak or hint for the Millett Hybrid, give us a shout!