Buy Boards & Parts:
www.beezar.com
DIYForums.org
The Millett Hybrid MOSFET-MAXed - Construction

Drawings & Templates

Millett MOSFET-MAX Casework Drawings - PCB Dimensions
(right-click to download the following):
  • Highest resolution PDF (best):
  • Highest resolution PNG-8:
  • Highest resolution GIF:
  • AutoCAD DWG (R2010 compatible):
  • Note: this AutoCAD file is stand-alone, but is also required as an Xref in the AutoCAD drawing below.

    The Millett Hybrid MOSFET-MAXed is designed to be used with the popular Hammond Mfg 1455 series enclosures, specifically, the Hammond 1455T1601. Below are drawings and templates to assist you in installing a populated MOSFET-MAX PCB into the Hammond case. Of course, this is only one solution - many others are possible.
    Millett MOSFET-MAX Casework Drawings - Endplate Templates
    (right-click to download the following):
  • Highest resolution PDF (best):
  • Highest resolution PNG-8:
  • Highest resolution GIF:
  • AutoCAD DWG (R2010 compatible):
  • Note: this AutoCAD file combines all templates into one drawing, but requires the PCB AutoCAD drawing above as an Xref.
    NOTE: The PDF files are probably the best to use in printing out drilling templates for the MOSFET-MAX. However, with the multitude of printers that exist, it is impossible to guarantee that the templates will print to scale in every case. The graphic scales are included to assist in this task, however. Adjust your printing scale until the graphic scales are the correct size.
    Millett MOSFET-MAX Casework Drawings - Top Plate & Bottom
    (right-click to download the following):
  • Highest resolution PDF (best):
  • Highest resolution PNG-8:
  • Highest resolution GIF:
  • AutoCAD DWG (R2010 compatible):
  • Note: this AutoCAD file combines all templates into one drawing, but requires the PCB AutoCAD drawing above as an Xref.

    Combined templates - 8.5 x 14 sheet required:   8.5 x 14 PDF file - 648 kb
    Additional Info

    MOSFET-MAX recommended enclosure:
    Hammond 1455T1601 (166 kb PDF file)
    MOSFET-MAX recommended volume pot
    (PCB also accepts a Noble pot):

    Alps RK27 Potentiometer (174 kb PDF file)
    MOSFET-MAX recommended phone jack (fits PCB pads):
    Neutrik NMJ6HCD2 PCB Stereo Phone Jack (37 kb PDF file)
    MOSFET-MAX recommended tube bushings (optional):
    These are available at Mouser - Part #561-MP10012. Also, many hardware stores carry these in the misc. parts, screws, and nuts section.

    file last changed:Sunday, June 13, 2010 7:00:00 AM
    Please contact the MAX webmaster for questions about these web pages.